Products Presentations

8260AGenelec 8260A Three-Way DSP System

The Genelec 8260A DSP loudspeaker system represents Genelec’s cutting-edge innovations in all technology domains.

The MDC™ Minimum Diffraction Coaxial Mid/High driver is a breakthrough design providing more accurate imaging and improved sound quality both on- and off-axis.

The sophisticated aluminum MDE™ enclosure is complemented by the advanced AutoCal calibration system, part of the GLM software, making the 8260A loudspeaker unique in the market for its outstanding sound quality and technology.

> Full length Genelec 8260A video

GLM and DSP SystemsGenelec DSP Systems

The following videos provide detailed insights into the benefits, setup and use of Genelec DSP monitoring systems.


1. Introduction to the DSP Product Range

The DSP series consists of four loudspeakers and four subwoofers controlled by two Genelec Loudspeaker Manager (GLM) software packages, either the full GLM for large systems or the GLM.SE "Small Environment" system for small listening rooms.

2. Benefits of the DSP Systems

Genelec DSP systems are built on the revolutionary Genelec 8000 series technology with the addition of a digital networking system, on-board DSP and the powerful automated loudspeaker system calibration - AutoCal.

3. DSP Systems Setup

How to setup and install your software CD, signal and network cables, network interface device, Genelec measurement microphone and your DSP loudspeaker / subwoofer systems.

4. AutoCal™ - Automatic Calibration

Genelec calibration microphone should be placed at the listening position with its capsule pointing up and adjusted at the listener’s ear level. Then, let AutoCal do the rest!

5. Using DSP Systems after Calibration

GLM software and GLM network have full control on DSP loudspeakers. However, if you do not wish to have the computer running with the GLM software, you can still benefit from all calibration settings. This is called the Stand-alone mode.

真力中国(北京真力音响有限公司)北京市朝阳区酒仙桥路10号恒通商务园B33一层101   邮编100015   电话:400 700 1978,+86 10 5823 2014