Genelec 1092A
Technical Specifications
| Free field frequency response ( ±2.5dB): | 33 - 80 Hz | |
| Maximum short term sine wave acoustic output in half space, averaged from 35 Hz to 85 Hz @ 1m: |
> 115 dB SPL | |
| Self generated noise level in free field @ 1m on axis (A-weighted): |
< 10 dB | |
| Harmonic distortion at 100 dB SPL @ 1m on axis in half space (30-100 Hz): |
< 4% | |
| Driver: | 2 x 210 mm (2 x 8") | |
| Weight: | 30 kg (66 lbs) | |
| Dimensions: Height Width Depth |
615 mm (24 3/16") 320 mm (12 5/8") 510 mm (20 1/16") |
|
AMPLIFIER |
||
| Amplifier output power (Long term output power is limited by driver unit protection circuitry): |
180 W (4 Ohm) | |
| Amplifier system distortion at nominal output: | THD < 0.08% CCIF-IM < 0.08% DIM 100 < 0.08% |
|
| Signal to Noise ratio, referred to full output: | > 100 dB | |
| Mains voltage: | 100/200V or 115/230V | |
| Power consumption (average): | Idle 50 VA Full output 300 VA |
|
FILTER |
||
| Subsonic filter (18 dB/octave) below: | 33 Hz | |
| Crossover frequency (sub/main monitors): | 85 Hz | |
| Crossover frequency (sub input channel): | full band/85 Hz | |
| Crossover acoustical slope Lowpass: Highpass: |
28 dB/octave 12 dB/octave |
|
| Midband rejection, frequencies > 400 Hz: | > 50 dB | |
| Bass roll-off control operating range in 2 dB steps: |
from 0 to -6 dB @ 33 Hz | |
| Phase matching control in 90° steps: | from 0° to -270° @ 85 Hz | |
All data subject to change without prior notice |
||